GE NetworX V3 - Receiving SMS Messages from a Security System

NetworX Version 3 Installation Manual
215
To Do This Send This Explanation Example
Stop reporting until system re-
arm
stop reporting
Stops reports being sent
form the NX7002 until the
system is rearmed.
stop reporting
Stop reporting until you start it
again
stop reporting permanent
Stops reports being sent
from the NX7002 until the
start reporting command is
sent.
stop reporting permanent
Register your phone
register [phone number user
number]
The phone is registered with
your alarm system.
register 32444123456 2 to register the
number 32444123456 to user 2
Register your phone with a new
password
register [phone number user
number Password]
The phone is registered with
your alarm system with a
new password.
register 32444123456 1 44aa44 to
register the number 32444123456 to
user 1 with a password 44aa44
To change language
language [language]
The language the SMS texts
use is changed. The
available arguments
(languages) are: English,
Dutch, Espanol, Suomi,
Italiano, Polska, Portugues,
Svenska, Francais, Dansk,
Deutsch and Norsk.
Note: no national
characters are to be used in
typed arguments.
language deutsch to change the
interface to German
To get a list of SMS commands
help
Sends a list of valid SMS
commands to your phone.
help
To get a users details
user details [user number]
Sends the users details to
your phone.
user details 2 to receive a message with
information about user 2
To get the current configuration
of outputs
list outputs
Sends a list of how the
outputs are currently
programmed to your phone.
list outputs
To get a list of users list users
Sends a list of all currently
registered users and their
phone numbers.
list users
To disable access from the
specified phone
disable phone [phone number]
Disables the SMS system
control from the particular
phone.
disable phone 32444123456 to disable
HomeText control from this phone
number
To enable access from the
specified phone
enable phone [phone number]
Enables a previously
disabled SMS system
control from the particular
phone.
enable phone 32444123456 to enable
HomeText control from this phone
number
To change your password
password [new password]
Changes your password.
password 44aa44 to change a
password assigned to your phone to
44aa44
To change another persons
SMS password
password phone [phone
number new password]
Changes another person’s
password.
password phone 32444123456 44aa44
to change a password assigned to the
number 32444123456 to 44aa44
Receiving SMS messages from a security system
HomeText can be set up to send two types of text messages to a user’s phone.
• Confirmation messages are sent after a message has been received. They let the user
know the message has been received and the command has been carried out.