NetworX Version 3 Installation Manual
149
95 PARTITION 4, ACCOUNT CODE
10-10-10-10-10-
10
PARTITION 4, FEATURE SELECTION
Segment 1 Segment 2 Segment 3
1 Quick Arm 1 LED extinguish enable 1 Open/Close
2 Re-Exit 2 Require user code for bypassing
zones
2 Bypass
3 Auto Bypass (interior) 3 Bypass sounder alert 3 Restore
4 Silent Panic 4 AC power/ low battery sounder alert 4 Trouble
5 Audible Panic 5 Enables bypass toggle 5 Tamper
6 Auxiliary 1 6 Enables silent auto arm 6 Cancel
7 Auxiliary 2 7 Enables automatic instant (entry/exit) 7 Recent Closing
8 Multi Keypress Tamper 8 Final set door 8 Exit Error
Segment 4 Segment 5
1 Late to close/early to open 1 Disables auto bypassing of force armable zones
2 Auto arm in stay mode 2 Reserved
3 Enables instant night 3 Reserved
4 Tamper when sensor lost if armed 4 Reserved
5 Enables instant stay toggle 5 Reserved
6 Arming with tamper mem./ comm. failure 6 Reserved
7 Arming with battery trouble 7 Reserved
96
8 Keyswitch zone arms in stay mode 8 Reserved
ENTRY/EXIT TIMERS
Segment 1 (Entry Time 1) 0
Segment 2 (Exit Time 1) 0
Segment 3 (Entry Time 2) 0
Segment 4 (Exit Time 2) 0
Reserved 0
97
Reserved 0
110 CONFIGURATION GROUP 1 ALARM CODE
4
CONFIGURATION GROUP 1 CHARACTERISTIC SELECT
Segment 1 (Circle Numbers To Program)
1 Fire (enable for fire zone) 5 Delay 1 zone (enable to follow Timer 1 Entry/Exit
times)
2 24 Hour (enable for non-fire 24 hour zone) 6 Delay 2 zone (enable to follow Timer 1 Entry / Exit
times)
3 Keyswitch zone 7 Interior (Enable for auto bypass or stay arming)
4 Follower (enable for burglary zones that
are instant during non-entry times)
8 Local Only (enable if zone is not to be reported)
Segment 2 (Circle Numbers To Program)
1 Keypad audible on alarm 5 Bypassable
2 Yelping siren on alarm
6 Group Bypass
3 Steady siren on alarm 7 Force armable
4 Chime 8 Entry Guard
Segment 3 (Circle Numbers To Program)
1 Fast Loop Response
5 Dialer Delay zone
2
Double End of Line Tamper zone
6 Swinger zone
3 Trouble zone (Fire and Day zone) 7 Restore reporting
4 Cross Zone
8 Listen-In
Segment 4 (Circle Numbers To Program)
1 Zone activity monitor 5 Reserved
111
2 End of line resistor defeat 6 Reserved