NetworX Version 3 Installation Manual
61
3. Enter the new code and press OK.
4. Enter the new code and press OK.
5. The keypad beeps once to confirm the change and returns to Code.
6. Scroll to Authority>Arm Only>Yes and press OK.
7. The keypad beeps once to confirm the change and returns to Arm Only.
8. Navigate with the ½¾ keys to Partitions and press OK.
9. Press the corresponding numerical key to include partitions 1 and 2 and to exclude all
other partitions and press OK.
10. The keypad beeps once to confirm the change and returns to Partitions.
To Next Page
Loading...
