GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 4 - General procedures and Functional checks 4 - 23
4-2-7-6 Connectivity — Recording the TCP/IP settings
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 as ‘ADM’" on page 4-15.
2.) Select Connectivity > Tcpip.
3.) Record all settings in: Table 4-1 "Record settings from Tcpip screen and sub-screens" on page 4-24.
4.) Select Network Settings.
5.) Double-click Local Area Connection.
6.) Select Properties.
7.) Double-click Internet Protocol (TCP/IP).
8.) Select Advanced
9.) Record the settings in Table 4-1 "Record settings from Tcpip screen and sub-screens" on page 4-24.
- Record if DHCP is Enabled.
- Record IP address, Subnet mask and Default gateways
Figure 4-22 Tcpip screen, Example
Settings
Figure 4-23 Tcpip > Network Settings
NETWORK SETTINGS