GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
4 - 22 Section 4-2 - General procedures
4-2-7-4 Connectivity — Tools
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 as ‘ADM’" on page 4-15.
2.) Select Connectivity > Tools.
3.) If in use: Record the Remote Path.
4.) If in use: Record the Configurable Remote Path User. Also ensure that you have the correct
Password for this user available, before you continue.
4-2-7-5 Connectivity — Formats
Ensure that an Application Specialist have recorded the needed information from the Formats screen.
Figure 4-21 Tools
To Next Page
Loading...
