GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 8 - Replacement procedures 8 - 23
8-4-10-5 Press A. Install System Software. (Erase all partititions) (cont’d)
Loading the Application Software
1.) If not already done, remove the System Software DVD and insert the applicable Application
Software CD in the DVD drive.
2.) Press any key to continue.
The VIVID E9 will reboot.
The monitor may display the message “No sync” for a few seconds before the
BIOS Boot Screen is displayed.
Figure 8-13 Rebooting 
Figure 8-14 BIOS Boot Screen (BEP6)