GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 8 - Replacement procedures 8 - 57
8-5-11-2 Cable Hook removal
Follow these steps to remove the Cable Hook:
1.) Locate the Cable Hook(s).
2.) Place the Rear Cover face down on a protected, flat surface.
3.) Remove the screw securing the Cable Hook.
4.) Repeat step 2 to remove the other Cable Hook, if necessary.
Figure 8-58 Door I/O Panel
Figure 8-59 Cable Hook screw placement
Cable Hook