GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
8 - 58 Section 8-5 - Replacing Covers and Bumpers
8-5-11-3 Cable Hook installation
Follow these steps to install the Cable Hook:
1.) Position the Cable Hook on the Rear Cover.
2.) Install the screw to secure the Cable Hook to the Rear Cover.
3.) Repeat step 2 to replace the other Cable Hook, if necessary.
4.) Install the Rear Cover.
5.) Install the Top Cover.
6.) Inspect the Filter, and clean if necessary.
7.) Install the Filter.
8.) Install the Filter Cover at rear.
9.) Install the Rear Bumper.
10.)Install the Side Covers.