GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 8 - Replacement procedures 8 - 71
8-5-17-1 Preparations (cont’d)
8-5-17-2 Remove the Bulkhead Cover
Follow these steps to remove the Bulkhead Cover:
1.) Use thumbs to press upper lock tabs toward the front of the VIVID E9 to release the top of the
Bulkhead Cover, or, if needed, use a 4 mm flat blade screwdriver to release the 2 lock tabs.
2.) Pull the Bulkhead Cover away from the VIVID E9.
Figure 8-73 Bulkhead Cover location
Figure 8-74 Upper tab lock placement on Bulkhead Cover
BULKHEAD
COVER WITH XY
MECHANISM
EXTENDED