GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 8 - Replacement procedures 8 - 133
8-6-19-2 Lower Switch Board with Elastomer removal
1.) Disconnect the cable to the Encoder Board.
2.) Remove the 26 fixing screws.
3.) Remove the Lower Switch Board with Elastomer. Store it in an ESD safe place.
Figure 8-146 Lower Switch Board with Elastomer - Trackball already removed.
Figure 8-147 Lower Switch Board with Elastomer - Trackball already removed.