GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 8 - Replacement procedures 8 - 137
8-6-20-3 Install the Lower Bezel
1.) Install the Switch Cups in the correct positions on the Lower Bezel. Use the mirrored image in Figure
8-149 as a reference.
NOTE: THE ILLUSTRATION BELOW IS A MIRRORED ILLUSTRATION.
USE IT FOR REFERENCE WHEN INSTALLING THE SWITCH CUPS!
2.) Install the Lower Switch Board with Elastomer.
3.) Install the Encoder Board.
4.) Install the Trackball.
5.) Install the Operator Panel, Lower.
6.) Install the Operator Panel, Upper.
7.) Install the Knobs for Encoders and Slidepots.
Figure 8-149 Mirrored illustration of the Switch Cups positions
MIRRORED VIEW
To Next Page
Loading...
