GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
8 - 258 Section 8-11 - Back End Processor (BEP) parts replacement
8-11-3-2 BEP6 Hard Disk Drive (HDD) removal procedure
Follow these steps to remove the HDD:
1.) Disconnect the cables connecting the HDD.
2.) Remove the two screws that secures the HDD Bracket to the BEP’s frame.
3.) Get hold of the HDD assembly, see figure below, and pull it out.
Figure 8-231 BEP6 HDD screws
Figure 8-232 Pull out the HDD assembly