GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 10 - Care & maintenance 10 - 17
10-5-6-5 Cleaning TEE probes (cont’d)
To clean the connector:
In normal TEE Probe use, the cleaning of the connector should be unnecessary. If cleaning is absolutely
necessary:
1.) Use a cloth or towel with only the smallest amont of cleaner/ disinfectant to wipe the connector.
2.) Avoid the connector pin area.
3.) Wipe off residual chemicals with a cloth or towel lightly moistened with clean water.
4.) Dry with clean cloth or towel.
5.) To remove residual chemicals follow the same prosedure as above, but use a cloth or towel lightly
moistened with clean water.
6.) Wipe off moisture with a cloth or towel and place the probe in a TEE Storage Rack and let it dry for
30 min.