GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
3-38 Section 3-7 - Printer Installation
23.)Finally click on Finish
24.)Assign the printer to the remote keys P1, P2 and/or P3
25.)Assign the printer as Report Printer
26.)Close app open windows, select Save & Exit and restart the system (turn off and on the system).
3-7-4 Installing the Deskjet Color Printer directly via an USB-cable
1.) Power off/Shutdown the system as described in: Section 3-6-3 on page 3-28.
2.) Connect the printer according to connection scheme:
3.) Power On/Boot Up the system as described in Section 3-6-2 on page 3-25
All software drivers are pre-installed for the designated printer only.
4.) Verify correct printer settings; Section 3-7-7 "Adjustment of Printer Settings" on page 3-49
5.) Assign the printer to the remote keys P1, P2, P3; see Section 3-7-8 "Remote Control Selection" on
page 3-53
6.) Assign the printer as Report Printer, see
To Next Page
Loading...
