GE Voluson P6 - Section 8-10 Replacement of FRONT PRINTER BEZEL ASSY BT16; 8-10-1 Manpower; 8-10-2 Tools; 8-10-3 Disassembly Procedure

GE DRAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-27
Section 8-10
Replacement of FRONT PRINTER BEZEL ASSY BT16
8-10-1 Manpower
1 people, 5 minutes
8-10-2 Tools
Philips screw driver
8-10-3 Disassembly Procedure
1.) Remove the FRONT PRINTER BEZEL ASSY BT16. Refer to the figure below.
2.) Unscrew 2 screws and remove the PRINTER DUMMY COVER ASSY BT16. Refer to the figure
below.
8-10-4 Installation Procedure
Install the new parts in the reverse order of removal procedure.
Figure 8-23 Removing the FRONT PRINTER BEZEL ASSY BT16
Figure 8-24 Removing the Printer Dummy Cover Assy BT16
FRONT PRINTER BEZEL ASSY BT16
PRINTER DUMMY COVER ASSY BT16