GE Voluson P6 - 3-8-1-3 How to enter Clinic Name; 3-8-1-4 How to change Language and;or EUM Language

GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
3-58 Section 3-8 - System Configuration
3-8-1-3 How to enter Clinic Name
1.) Invoke System Setup as described in Section 3-8-1-1 on page 3-56.
2.) On the left side of the screen select GENERAL SETTINGS
and then click on the GENERALSETTINGS
tab.
3.) Select the text box to enter a new “Clinic Name” with the keyboard.
4.) Close the Service page with Save&Exit.
The clinic name will be copied into the Hospital ID in the information header.
3-8-1-4 How to change Language and/or EUM Language
1.) Invoke System Setup as described in Section 3-8-1-1 on page 3-56.
2.) On the left side of the screen select GENERAL SETTINGS
and then click on the GENERAL SETTINGS
tab.
3.) Select the desired language from the pull-down menu.
4.) Close the Service page with Save&Exit.
NOTE: After changing the language the system has to reboot.