GE Voluson P6 - Section 8-13 Replacement of TRAY PEDESTAL CABINET PLASTIC BT16; 8-13-1 Manpower; 8-13-2 Tools; 8-13-3 Disassembly Procedure

GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
8-32 Section 8-13 - Replacement of TRAY PEDESTAL CABINET PLASTIC BT16
Section 8-13
Replacement of TRAY PEDESTAL CABINET PLASTIC BT16
8-13-1 Manpower
1 people, 5 minutes
8-13-2 Tools
Not required
8-13-3 Disassembly Procedure
1.) Remove the TRAY PEDESTAL CABINET PLASTIC BT16. Refer to the figure below.
2.) Remove the two Self-Adhesive Loops. Refer to the figure below.
Figure 8-32 Removing the TRAY PEDESTAL CABINET PLASTIC BT16
Figure 8-33 Removing the two Self-Adhesive Loops
TRAY PEDESTAL CABINET
PLASTIC BT16
Self-Adhesive Loops