GE Voluson P6 - 4-7-2 Control Console Positioning; 4-7-2-1 Assembly procedure for converting Voluson P8;VolusonP6 from Low Version to High Version

GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
4-28 Section 4-7 - Peripheral Checks
4-7-2 Control Console Positioning
The control console can be adjusted to a fixed height (910 mm) with an Extender Kit (H46712CE).
4-7-2-1 Assembly procedure for converting Voluson™ P8/Voluson™P6 from Low Version to High
Version
1.) Remove 2 RUBBER CAPS on SPEAKER COVER LEFT and RIGHT
Figure 4-29 Removing the RUBBER CAPS
2.) Unscrew 2 screws to remove the SPEAKER COVER LEFT and RIGHT.
Figure 4-30 Unscrewing 2 screws to remove SPEAKER LEFT and RIGHT