GE Voluson P6 - Section 8-47 Replacement of the CSI; 8-47-1 Manpower; 8-47-2 Tools; 8-47-3 Preparations

GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
8-142 Section 8-47 - Replacement of the CSI
Section 8-47
Replacement of the CSI
8-47-1 Manpower
One person, 30 minutes
8-47-2 Tools
Philips screwdriver
8-47-3 Preparations
1.) Power Off/Shutdown the system as described in 4-3-2 on page 4-4.
2.) Pull out the NEST as described in Section 8-28 "Replacement of the NEST" on page 8-93
8-47-4 Removal Procedure
1.) Unscrew 4 screws to remove the LED Indicator bracket.
Figure 8-203 Opening the rear bracket