GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
8-184 Section 8-59 - Replacement of WIRELESS LAN
8-59-5 Installation Procedure
1.) Install the new parts in the reverse order of removal.
2.) Perform :
3.) Perform :
8-59-6 Set up WIRELESS LAN
1.) Press Utility -> System setup -> Connectivity -> Device Setup ->WLAN Configuration.
The Wireless Network Configuration tool appears.
2.) Go to Wireless Network tab and check that available Wireless Networks connection list.
3.) Double click the available wireless network resource and edit the network key to connect.
8-59-7 Functional Test
1.) Select Utility -> System setup -> Connectivity -> Device Setup ->WLAN Configuration..
2.) Move to Properties tab and check the MAC Address is shown.
Figure 8-267 Functional Test for WIRELESS LAN
To Next Page
Loading...
