GE Voluson P6 - Page 547

GE DRAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-185
FRU8-2: System Software - Installation/Upgrade Procedure
FRU8-3: Software and Functional Checks after Installation/Upgrade Procedure
FRU8-4: Image Settings Only - Loading Procedure
go to 4-5-2 Load Small Backup (Scan Settings)
FRU8-5: Full Backup (Full System Configuration) - Loading Procedure
go to 4-5-4 Load Full System Configuration (Full Backup)
FRU8-6: Image Archive - Loading Procedure
go to 4-5-6-2 Load Image Archive
FRU8-7: Replacement or Activation of Options
See Section
Functional and/or
Leakage Current Test Debrief Script
4-3-1
Power On / Boot Up Proprietary Service Manual,
Voluson™ P8/Voluson™P6,
Revision Voluson™ P8/
Voluson™P6, Section 8-2.
Equipment passed all required
tests and is ready for use.
8-3
Software and Functional Checks after Installation/Upgrade Procedure
Table 8-2
System Function
4-3-2
Power Off / Shutdown
See Section
Functional and/or
Leakage Current Test
Debrief Script
4-3-1
Power On / Boot Up Proprietary Service Manual,
Voluson™ P8/Voluson™P6,
Revision Voluson™ P8/
Voluson™P6, Section 8-3.
Equipment passed all required
tests and is ready for use.
Table 8-2
System Function
4-3-2
Power Off / Shutdown
See Section
Functional and/or
Leakage Current Test
Debrief Script
Table 8-2
System Function Proprietary Service Manual,
Voluson™ P8/Voluson™P6,
Revision Voluson™ P8/
Voluson™P6, Section 8-7.
Equipment passed all required
tests and is ready for use
functional checks depend on activated option