GE Voluson P6 - 8-45-5 Installation Procedure

GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
8-138 Section 8-45 - Replacement of the DBM64G
2.) Unscrew 6 screws.
3.) Remove DBM64G from the EMI SHIELD BRACKET.
8-45-5 Installation Procedure
1.) Install the new parts in the reverse order of removal.
2.) Perform: FRU8-36: Replacement of the DBM64G - Functional Tests..
Figure 8-198 Unscrewing 6 screws and removing the EMI SHIELD BRACKET