GE RAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
5-78 Section 5-17 - LINUX - Voluson Maintenance System
13.)Please wait until all processes are finished and the final “DOC” window (see figure below) appear.
14.)Press A
key to activate the Ultrasound Application Software [UIS].
15.)If prompted, enter the “Permanent key” and then click Submit.
16.)Customize the system as described in Section 5-17-8 on page 5-84.
Figure 5-51 press the “A” key to start UlSApp
Figure 5-52 enter Permanent key
To Next Page
Loading...
