GE DRAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-77
11.)Unscrew 2 screws and remove FRONT PEDESTAL COVER BT16.
12.)Untie the cable ties on keyboard base. Refer to the figure below.
13.)Untie the cable clamps underneath the pedestal. Refer to the figure below.
Figure 8-112 Removing the FRONT PEDESTAL COVER BT16
Figure 8-113 Untiing the cable ties
Figure 8-114 Untiing the cable clamps
FRONT PEDESTAL
COVER BT16
To Next Page
Loading...
