3. Select the [VCI-OmniView] key.
4. Select a VCI-OmniView user setting (e.g., Default).
The preset values are loaded.
5. Move the horizontal green dotted line with the trackball to the desired position of the
ultrasound image on the screen.
6. Select the “Slice Thickness” by selecting one of the keys on the menu area.
Note
The actual values for slice thickness may vary from probe to probe.
7. Select the display format desired.
Note
The selected format will be present in freeze - and scan mode!
Volume Mode
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 9-103
To Next Page
Loading...
