Chapter 1, Installation 5
UNPACKING AND SETTING UP THE CUTTER
When unpacking the cutter, check whether all parts described below in
Cutter box contents
are included. Consult your distributor if anything is
missing. See Chapter 7 for dimensions.
Lifting the machine out of the box should be done by two people.
Protect the cutter from firm shocks.
Do not dismantle the unit
.
1. Lift the cutter unit out of the box and put it on a flat and stable surface.
35.5"
Tool Head
(remove foam)
To Next Page
Loading...
Need help?
General
