48 Chapter 4, Fine Tuning the Cutter
FEATURES OF THE OPTIONAL KNIFEHOLDER
For some applications more precise adjustment in the depth of the knife
blade is helpful. For those applications, Gerber can provide you with an
optional knife holder featuring a vernier that allows you to adjust the depth
of the knife in increments of 0.0004" (0.01 millimeter). For more
information on the optional knife holder, please contact your Gerber
distributor.
The upper scale lines make it possible to change the knife depth over
0.002" (0.05 mm).
The lower scale (vernier) makes it possible to change the knife depth
over 0.0004" (0.01 mm).
To Next Page
Loading...
Need help?
General
