3.2.3.1.5 Communication
A list with the following set-up options is displayed:
Enter node ID
Add CPU address
A window with an editable field is displayed for the above selected
option. Edit by using the cursor keys.
Press to save the change.
Select CPU address
Delete CPU address
A list of CPU addresses is displayed for the above selected option.
Select the desired CPU address and press
to select/delete.
Reset panel type
A popup window is displayed with prompting about resetting the
panel type.
• If “Yes” is selected, you confirm the selection and after
startup a list of available panel types will be displayed. Select
a
panel type and confirm the selection. The standard
selection must be “Stand alone”.
• If “No” is selected, the communication menu will be
redisplayed.
Note: In order for this command to work, the
Confirmations function must be active. See Settings in the
Screen Setting section.
3.2.3.1.6 Localization
A list of the following set-up options is displayed:
• Language
• Date format
• Pressure unit
• Temperature unit
A list is displayed for each of the options above. Select the
required option and press to save.
3 MENU TREE
TECHNICAL MANUAL GETINGE WD15 CLARO 27 (128)
<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>
To Next Page
Loading...
Need help?
General
