Getinge Maquet SERVO-s - Edit the Start-Up Configuration; Procedure Diagram; To Edit the Start-Up Configuration

10.3 Edit the Start-up Configuration
To edit the Start-up Configuration.
1. Press the Edit configuration touchpad in
the Biomed submenu.
2. Press the Start-up configuration touchpad.
3. Press the touchpad for desired start-up
setting.
4. Press Next to continue to ventilation mode
settings.
5. Press the appropriate touchpad to change
the settings.
Note: Press Restore mode settings to
restore factory default settings.
6. Press Next to view a summary of the
start-up configuration.
7. Press Accept to save the start-up settings.
Note: The ventilator must be restarted to
activate the new settings.
10.3.1 Procedure Diagram: Edit the
Start-Up Configuration
SVS-9045_XX
SERVO-s VENTILATOR SYSTEM V8.0, User's Manual
143
| Start-up configuration |
10 |