Getinge Maquet SERVO-s - Device Description and Components

1.1 Device description
This section provides general information
about the SERVO-s Ventilator System along
with guidelines for appropriate use.
1.1.1 Device Diagram
1
2
3
SVS_0001_EN
1.1.2 Device Components
The SERVO-s Ventilator System consists of
the following components:
1. User Interface—for setting ventilation
modes, displaying patient data, and
indicating alarms
2. Patient Unit—for mixing gases
3. Patient Breathing System—for delivering
and exchanging gases
1.1.3 Intended Use
The SERVO-s Ventilator System is intended
for treating and monitoring patients ranging
from pediatrics to adults with respiratory failure
or respiratory insufficiency
1.1.4 Intended User
The SERVO-s Ventilator System should be
used only by those who:
• are professional healthcare providers, and
• have received training in the use of this
system, and
• have experience of ventilation treatment.
1.1.5 Intended Use Environment
The SERVO-s Ventilator System should be
used only:
• in hospitals
• in facilities whose primary purpose is to
provide healthcare
• during transport of a patient within hospitals
or healthcare facilities
1.1.6 Cleaning and Maintenance
Please refer to the SERVO-i/s Cleaning and
Maintenance User's Manual.
6
SERVO-s VENTILATOR SYSTEM V8.0, User's Manual
| 1
| Introduction |