Getinge Maquet SERVO-s User Manual

5.12.2 Disabling Backup ventilation
The backup ventilation can only be disabled
in invasive ventilation.
It is possible to either enable or disable
Backup ventilation via the Biomed menu. If
this choice is made, then an extra touchpad
(Backup ventilation) (1), is displayed in the Set
Ventilation Mode window during ventilation.
Note: It is only possible to deactivate
backup ventilation when running, not in
Standby.
1
To disable backup ventilation:
1. Press the Backup ventilation touchpad.
2. A confirmation dialog Do you really want
to deactivate backup ventilation? is
displayed. Confirm by pressing Yes.
3. Backup ventilation off is displayed on the
Ventilation mode touchpad.
4. Press Accept in the Set Ventilation Mode
window.
The backup function is automatically
re-activated if the user:
• Changes to a controlled mode of ventilation.
• Sets the ventilator to Standby.
• Turns off the system.
96
SERVO-s VENTILATOR SYSTEM V8.0, User's Manual
| 5
| Ventilation, modes and functions |

Getinge Maquet SERVO-s Specifications

General

Brand	Getinge
Model	Maquet SERVO-s
Category	Fan
Language	English