2.3 Navigating the User Interface
The following subsections provide general
procedures for working with the user interface.
More detailed procedures for specific tasks
are found in later chapters and in the
Appendix.
2.3.1 Touch Screen
To adjust ventilator settings:
1. Activate the desired menu by touching
one of the pads at the top of the screen.
2. Activate the desired parameter by
pressing its touchpad.
The touchpad is now highlighted in white
with a blue frame and it is possible to set
a new value.
3. Turn the Main Rotary Dial to the desired
value or line.
4. Confirm each setting by pressing the
parameter touchpad or pressing the Main
Rotary Dial.
5. The touchpad turns grey again indicating
that the new setting has been entered.
6. Press Accept to activate the new settings,
or Cancel to start over.
Important: Different ways of interacting
with the screen will affect its lifetime. Never
use any sharp or pointed objects, such as
ballpoint pens, on the screen.
SERVO-s VENTILATOR SYSTEM V8.0, User's Manual
21
| System Overview |
2 |
To Next Page
Loading...
