Getinge Maquet SERVO-s - Status Touchpad

2.3.6 Status Touchpad
7
SVS-5008_XX
The Status touchpad indicates the power
supply currently being used by the ventilator
(AC power, battery power, or external 12V DC
power). If the ventilator is running on battery
power, the estimated remaining battery time
in minutes is shown.
To access the status window:
1. Press the Status touchpad.
Touchpads leading to status windows
appear.
Press any of the following touchpads.
2. General
3. O
2
cell / O
2
Sensor
4. Expiratory cassette
5. Batteries
6. Pre-use check
7. Patient Circuit
SERVO-s VENTILATOR SYSTEM V8.0, User's Manual
27
| System Overview |
2 |