Grandstream Networks GWN76 Series User Manual

P a g e | 104
GWN76XX User Manual
Version 1.0.19.25
Firewall
This section allows user to control the outgoing and incoming traffic from clients by manually setting up.
policies to either deny or permit the traffic based on protocol type and by specifying SSIDs and destinations.
Figure 81: Firewall-Outbound
Table 22: Firewall- Outbound
Field
Description
Service Protocol
Select type of traffic to be affected by the outbound rule like ICMP, HTTP,
HTTPS… or you may add another type of traffic when selecting Custom.
When set to Custom, user could enter the following:
Protocol: TCP or UDP
Port: define the port used by this protocol.
Policy
Either select to Permit or Deny Outbound traffic.
Destination
Select either:
 Particular Domain: enter FQDN of a destination.
 Particular IP: IP address of destination.
 Particular Network: Network IP address.
 All: the rule will apply on all destinations.
SSID
Select one or multiple SSIDs to apply the rule on.
User can define outbound and inbound rules on the traffic from the options in figure below:
Figure 82: Firewall-inbound

Grandstream Networks GWN76 Series Specifications

General

Brand	Grandstream Networks
Model	GWN76 Series
Category	Wireless Access Point
Language	English