Grandstream Networks GWN76 Series User Manual

P a g e | 66
GWN76XX User Manual
Version 1.0.19.25
Figure 45: Client Bridge
Figure 46: Client Bridge
In order to verify, you may access the bridged AP configuration, then under Status, the option “Client
Bridge Mode” would be set to Isolated like shown on the figure down below:
Figure 47: Client Bridge Mode
Important Notes :
 The access point that will be operating on bridge mode, must be set with a fixed IP address before
activating the bridge mode on the access point.
 Users must enable client bridge support option under SSID or SSID Wi-Fi settings in order to have
it fully functional.

Grandstream Networks GWN76 Series Specifications

General

Brand	Grandstream Networks
Model	GWN76 Series
Category	Wireless Access Point
Language	English