Grandstream Networks GWN76 Series User Manual

P a g e | 119
GWN76XX User Manual
Version 1.0.19.25
Maintenance
Upgrade
The Upgrade Web page allows upgrade related configuration.
Table 33: Upgrade
Field
Description
Upgrade Protocol
Allow users to choose the method to load the firmware and config:
TFTP, HTTP or HTTPS.
Allow DHCP options 66 and 43
override
Enable/Disable DHCP options 66 and 43 to override the upgrade
and provisioning settings
Check/Download New Firmware
and Config at Boot
Configure whether to enable/disable automatic upgrade and
provisioning when reboot.
Reboot
Click on button to reboot device.
Factory Reset
Click on to restore the device and all online APs to
factory default settings.
Firmware Server
Define the IP address or URL for the firmware upgrade server.
Make sure all files relevant to the firmware are updated completely.
Upgrade Now
Click on button to begin the upgrade. Note that the
device will reboot after downloading the firmware.
Automatic Upgrade
Set automatic upgrade every intervals/day/week. The device will
request to upgrade automatically according to the setup time. The
default setting is Disabled
X Hours
Select the time period to check for firmware upgrade.
This field is available when select “Check every X Hours” in
“Automatic Upgrade”
Hour of Day (0-23)
Defines the hour of the day (0-23) to check the HTTP/TFTP server
for firmware upgrade or configuration file changes.
This field is available when select “Check at Hour of Day” and
“Check at Day of Week” in “Automatic Upgrade”
Day of Week
Defines the day of the week to check the HTTP/TFTP server for
firmware upgrade or configuration file changes.

Grandstream Networks GWN76 Series Specifications

General

Brand	Grandstream Networks
Model	GWN76 Series
Category	Wireless Access Point
Language	English