Grandstream Networks GWN76 Series - Alert Configure; Table 36: Email Events; Figure 91: Alert Configure

P a g e | 122
GWN76XX User Manual
Version 1.0.19.25
SMTP Settings
SMTP Host
Configures the SMTP Email Server IP or Domain Name.
SMTP Port
Specifies the Port number used by server to send email.
Receiver Email Address
Specifies the email addresses to receive notifications.
Alert Configure
Figure 91: Alert Configure
The following table describes the notifications configuration settings.
Table 36: Email Events
Filed
Description
Memory Usage
Configures whether to send notification if memory usage is greater than the
configured threshold.
AP Throughput
Once enabled, master will generate an Alert when AP throughput reaches the
configured threshold.
SSID Throughput
Once enabled, master will generate an Alert when SSID throughput reaches the
configured threshold.
Admin Password
Change
Configures whether to send notification on admin password change.
Firmware upgrade
Configures whether to send notification on firmware upgrade.
Rogue AP
Once enabled, system will generate an Alert when there is a Rogue AP detected.
AP Offline
Configures whether to send notification when AP going offline.