2-10
3
Set the stock shaft in from the front.
CAUTION
•
During a plotting or cutting operation, be sure
to keep your hands, hair, and so forth away
from the media stocker, gears and rollers.
•
When you are installing media, be careful for
gear, a roller, etc. not pinch you nger.
•
Deviations and errors may result if the stock
shaft is misaligned when plotting begins.
Align the receiving end of the media shaft with the grooves
on the roller and push down rmly to set it in place.
Stock shaft
Groove
Roller
Media stopper
4
The left and right media anges feed in the paper roll media.
Please tighten the ange screw and fasten the paper roll into
the desired position.
Flange screw
To Next Page
Loading...
