GRAPHTEC WR1000 - Replacing the Power Unit for Channels 9 to 16

WR1000-UM-251–01–9380 3 – 20
3. DISASSEMBLY AND REASSEMBLY
3.4.3 Replacing the Power Unit for Channels 9 to 16
Disconnect the cables from two connectors, unfasten the four screws, then replace the power unit for chan-
nels 9 to 16.
Fig. 3-4-5
M3L4 binding-head
screw
M3L4 binding-head
screw
Power unit for channels
9-16 (ZWS50-24)
CN2: DC OUT
M3L4 binding-head
screw
CN1: AC
M3L4 binding-head
screw