GRAPHTEC WR1000 - 1 Configuration; Model Configuration; Factory-Installed Options; Supplies

WR1000-UM-251–01–9380 1 – 1
1. CONFIGURATION
1. CONFIGURATION
1.1 Model Configuration
The model number of the WR1000 Series Thermal Arraycorder varies according to the number of channels
installed in the main unit, as explained below.
WR1000-
8 : 8-channel model
16: 16-channel model
1.2 Factory-Installed Options
The following table lists the part numbers of options, which vary according to the type of option and the
number of channels installed in the option’s compatible main unit.
Table 1-2-1. Factory-installed options
Option Part no.
3
1
/2-inch MO drive B-384
3
1
/2-inch floppy disk drive B-385
SCSI interface* B-386
Memory option for the 8-/16-channel model B-389
12 VDC adapter for the 8-/16-channel model B-395
24 VDC adapter for the 8-/16-channel model B-396
*
: The SCSI interface cannot be installed and used concurrently with the GB-IB interface.
1.3 Supplies
Table 1-3-1. Supplies
Name Part no.
Minimum
Remarks
sales unit
Thermal paper PR231A 10 rolls 40 meters/roll
Thermal paper PZ231A 5 packs For use with the long-length Z-fold box, 100 meters/pack
Thermal paper PZ100 10 packs For use with the internal printer unit, 20 meters/pack
Head cleaner kit B-368 1 kit Cleaning fluid and sheets for cleaning the thermal print head


