- 111 -
➢ Anomaly: “minor” problems that do not bring the CPS to a halt but affect its performance or inhibit the use of
some of its functions.
External synchronism failed
Overvoltage on input line 1
Overvoltage on input line 2
Overvoltage on input line 3
Undervoltage on input line 1
Undervoltage on input line 2
Undervoltage on input line 3
Input frequency outside tolerance limits
Voltage on bypass line outside tolerance limits
Bypass frequency outside tolerance limits
Voltage on bypass line out of range
Overcurrent peak on output
Load > user-defined threshold
Positive branch batteries missing or battery fuses open
Negative branch batteries missing or battery fuses open
System temperature probe faulty
System temperature too high
Temperature of heat sink 1 < 0°C
Temperature of heat sink 2 < 0°C
Temperature of heat sink 3 < 0°C
Internal battery temperature probe faulty
Internal battery overtemperature
External battery temperature probe faulty
External battery overtemperature
Positive branch batteries to be replaced
Negative branch batteries to be replaced
To Next Page
Loading...
