GW Instek APS-7000 Series - Page 140

APS-7000 Series User Manual
140
Setting Screen
Overview
Test mode
V RANGE
System Conf
Save/Recall
Run test
Prompt
SD_CONT
SD_VOLT
SD_TIME
FSET
VSET
IRMS(A)
IPK(A)
PWR(W)
SD_SITE
PF
RAMP(s)
Delay
Dwell
HI/AUTO V Range
Memory cycle
Memory number
Step number
Step cycle
Next/End step
Settings Screen
Parameter
Overview
The following list describes the parameters on
the settings screen.
Memory
number
Sets the current memory number.
Memory cycle
Sets the number of cycles for the
selected memory number.
Step number
Sets the current step for the current
memory number.
Step cycle
Sets the number of cycles for the
selected step number.