GW Instek APS-7000 Series - Page 142

APS-7000 Series User Manual
142
PWR(W)
Sets the power high/low limit for
the step.
PF
Sets the power factor high/low
limit.
Ramp
Up/Down
Sets the ramp up and down times.
Delay
The delay time introduces a delay
time before testing pass/fail limits.
The delay timing starts as soon as a
step has started.
Dwell
The dwell time sets the total
execution time of the step.
Prompt
Sets a user-defined text message for
the current step.
Note: The Enter soft-key must be
used to exit out of the text input
screen.
On screen keyboard
Enter soft-key