APS-7000 Series User Manual
186
Continued next page.
Total harmonic distortion
(THD)
*7
≤0.5% at 45 ~ 1000Hz (Resistive Load)
Product specifications are subject to change without notice.
The Specifications are not suit for ARB mode.
*1 Maximum output current at working voltage 120Vrms, 240Vrms
*2 45 Hz to 500 Hz, 10% or higher of the rated output voltage, the maximum
current or lower.
*3 All of measurement accuracy is at 23±5°C.
*4 In the case of 15 V to 155 V / 30 V to 310 V, sine wave, no load.
*5 Maximum output current at working voltage 480Vrms.
*6 In the case of 60 V to 600 V, sine wave, no load.
*7 45 Hz to 1000 Hz, 10% or higher of the rated output voltage, the maximum
current or lower.
*8 Step Time does not guarantee specification.
To Next Page
Loading...
