GW Instek GDS-2000 Series - Page 135

SAVE/RECALL
135
4. Press F2 (Save All). The
display shows the available
file destinations. The
following files are saved,
contained in a folder.
Save
All
F 2
Setup file
(Axxxx.set)
Two types of setups are saved:
the current panel setting and
the last internally saved
setting (one of S1 ~ S20).
Display image
(Axxxx.bmp)
The current display image in
bitmap format.
Waveform data
(Axxxx.csv)
Two types of waveform data
are saved: the currently active
channel data and the last
internally saved data (one of
W1 ~ W20).
5. Press F2 (Ink Saver)
repeatedly to invert the
background color (On) or
not (Off) for the display
image.
Ink Saver
Off
F 2