GDS-2000 Series User Manual
116
System Info / Language / Clock
This section describes how to set the interface, beeper, language,
time/date, and probe compensation signal.
View system information
Panel operation
1. Press the Utility key.
Utility
2. Press F5 (More).
More
F 5
3. Press F2 (System Info). The
upper half of the display
shows the system
information in the following
format.
System
Info.
F 2
Manufacturer name Model name
Serial number Firmware version
4. Press any other key (for
example F5 (More) to go
back to the waveform
display mode.
More
F 5
Select menu language
Parameter
The following is the list of menu language
available by default. Language selection differs
according to the region to which GDS-2000 is
shipped.
English Chinese (traditional)
Chine (simplified) Korean
To Next Page
Loading...
