GW Instek GDS-2000 Series - Cursor Measurement; Cursor Use Horizontal Cursor

GDS-2000 Series User Manual
60
Cursor Measurement
Cursor line, horizontal or vertical, shows the position and value of
the waveform and math operation result.
Use horizontal cursor
Panel operation/
Range
1. Press the Cursor key.
Cursor
2. Press F1 (Source) repeatedly
to select the source channel.
Source
CH1
F 1
Range
4CH model
CH1, 2, 3, 4, Math
2CH model
CH1, 2, Math
3. Press F2 (Horizontal)
repeatedly to activate the
horizontal cursor.
Horizontal
F 2
Range
Horizontal cursor not activated
Left cursor movable, right cursor
position fixed
Right cursor movable, left cursor
position fixed
Left and right cursor movable
together
4. The cursor position
information appears on F4
menu.