SAVE/RECALL
141
5. Press F2 (Source) repeatedly
to select the file source,
internal memory or external
USB. Use the Variable knob
to change the memory
location (S1 ~ S20) or the file
name (DSxxxx.set).
Source
USB
F 2
Memory
Internal memory, S1 ~ S20
USB
External flash drive, no practical
limitation on the amount of file. The
setup file must be placed in the root
directory to be recognized.
6. Press F4 (Recall) to confirm
recalling. When completed,
a message appears at the
bottom of the display.
Recall
F 4
Note
The file will not be saved if the
power is turned Off or USB drive is
taken out before the message.
USB file utility
To edit USB flash drive
contents (create/ delete/
rename files and folders), press
F5. For details, see page123.
File
Utilities
F 5
To Next Page
Loading...
