GETTING STARTED
21
USB
RS-232C
GPIB (optional)
Date/Time
Current date and time (page117).
Memory bar
The ratio and the position of the
displayed waveform compared
with the internal memory (page95).
Trigger status
Triggered.
Not triggered, display not updated.
Not triggered, display updated.
Trigger stopped. Also appears in
Run/Stop (page50).
For trigger details, see page106.
Acquisition mode
Normal mode
Peak detect mode
Average mode
For acquisition details, see page85.
Input signal
frequency
Shows the input signal frequency.
Indicates the frequency is less than
20Hz (lower frequency limit).
Trigger
configuration
Trigger source, type,
slope. (Video trigger)
trigger source, polarity.
For trigger details, see page106.
Channel status
Channel 1, bw limit On, DC
coupling, 500mV/Div
Channel 1, bw limit Off, AC
coupling, 500mV/Div
For channel details, see page102.
To Next Page
Loading...
