EasyManuals Logo

H3C S7500E Series Installation Manual

H3C S7500E Series
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
73
MANUFACTURING_DATE : 2009-8-24
VENDOR_NAME : H3C
Slot 2:
DEVICE_NAME : LSQM1GV48SA0
DEVICE_SERIAL_NUMBER : 210231A76HB095000082
MAC_ADDRESS : NONE
MANUFACTURING_DATE : 2009-10-15
VENDOR_NAME : H3C
Slot 3:
DEVICE_NAME : LSQM1NAT24SC0
DEVICE_SERIAL_NUMBER : 210231A0EAX103000002
MAC_ADDRESS : NONE
MANUFACTURING_DATE : 2010-03-11
VENDOR_NAME : H3C
Slot 4:
DEVICE_NAME : LSQ1PT4PSC
DEVICE_SERIAL_NUMBER : 03A43E1111111111
MAC_ADDRESS : NONE
MANUFACTURING_DATE : 2007-11-4
VENDOR_NAME : H3C
Slot 5:
The operation is not supported on the specified board or subslot.
Slot 6:
The operation is not supported on the specified board or subslot.
Use the display device manuinfo slot slot-number command to display the electronic label of a card, for
example, the card in slot 0:
<Sysname> display device manuinfo slot 0
Slot 0:
DEVICE_NAME : LSQM1SRP2XB0
DEVICE_SERIAL_NUMBER : 210231A73JB098000078
MAC_ADDRESS : 0023-895F-958B
MANUFACTURING_DATE : 2009-8-24
VENDOR_NAME : H3C
Table 20 Output description
Field Description
DEVICE_NAME Card model
DEVICE_SERIAL_NUMBER Card serial number
MAC_ADDRESS
MAC address of the card.
An SRPU has a MAC address.
An LPU has no MAC address (the field is NONE).
MANUFACTURING_DATE Manufacturing date of the card
VENDOR_NAME Vendor name of the card
The operation is not supported on
the specified board or subslot
The card is a virtual LPU and does not support the display device manuinfo
command.

Table of Contents

Other manuals for H3C S7500E Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S7500E Series and is the answer not in the manual?

H3C S7500E Series Specifications

General IconGeneral
BrandH3C
ModelS7500E Series
CategorySwitch
LanguageEnglish

Related product manuals